High resolution images with the quality of HDTV, true color in low light and high-performance video processing is achieved by using highly sensitive in the cell 1 / 3 ' CMOS-sensor with progressive scan and the original technology Sarix. Through the use of mobile infrared filter dome IP-camera is capable of forming a color / black and white image with illumination up to 0.5 / 0.25 lux, and in particular low light IM10-E activates the accumulation of training algorithm, in which its sensitivity is increased to 0.12 / 0.03 lux. To optimize network resources CCTV dome model Pelco IM10-E can pass one or two simultaneous video streams that are configured with different resolution, frame rate, bit rate and structure of the GOP (Group of Pictures). Thus, the dome IP-camera allows you to set the image compression algorithm – H.264 or M-JPEG, resolution up to 1280×1024 pixels. and frame rate of up to 30 / sec. At a resolution of 1280×1024 pixels. (1.3 MPX), the maximum frame rate in H.264 to be 8 / s, M-JPEG – 20 k / s, whereas at 1280×720 pixels. (HDTV 720p) Frame Rate with IP-cameras will be 12.5 / 30 k / s, respectively.
Increase the information content of the image IM10-E allows you to synchronize sound with video. To organize the bi-directional audio communication IP-camera has audio input and output, which can connect an optional microphone and active speaker, and provides audio transmission in modes: "Half" or "full duplex". Due to the small size of housing supply and support the technology Power over Ethernet (PoE), IP-Dome camera can be installed at the facility, where it is needed, and eliminates the cost of purchasing and laying of additional power cable. Intellectual abilities Pelco IM10-E provides a built-in camera module with video analytics, basic package Pelco Camera Sabotage. Using the analytical algorithms, dome IP-camera broadcast video streams analyzes and tracks all changes to the frame.
In the case of attempts to paint / close the lens, the defocusing, separation, IP-camera from the mounting surface or unauthorized changes in the direction of observation, IM10-E informs the operator. Such security measures can use the new dome model objects in video surveillance systems with a high probability illegal acts, including metro, train stations, etc., as well as in places with unlimited / free access. Simultaneous monitoring of up to 16 IP-cameras Pelco Series Sarix, including the new dome model IM10-E, within a single network can be operator remotely via a standard Web browser. In addition, the dome IP-camera is integrated into the software for CCTV Pelco Endura and Digital Sentry, as well as third-party applications, for example, XProtect of Milestone. It Software effectively in the construction of large or geographically distributed video systems with unlimited number of cameras and other IP-based devices of different brands.