May 27 2015

Airbrushing

Published by at 7:36 am under News

Anyone who has ever wanted to do airbrushing, sooner or later face a similar question. What do I need so I can start painting? How to paint what and how to eat with it? Here I will try to list all of the most basic things needed for this, besides the desire, dedication, creative impulse and ambition. Let's start with the most important thing – the room. In order not to annoy the surrounding noise compressor, paint smells to us for this should be well ventilated room, which must be daylight, it is desirable that it was natural (windows), if not, in principle, not a big problem, because it can be corrected lamps. Further details can be found at Code.org, an internet resource. On the premises decided, now let's think what's going to draw – airbrush. Here the choice for creative people great, it all depends on your budget and disposable technical requirements. You can buy cheap Chinese and airbrush, but tremendous results from it not worth waiting for, although in certain skills and they can issue a masterpiece! You can buy an expensive airbrush, with a set of nozzles of different diameters for different thicknesses issued airbrush line! Now we need to power the airbrush, so it came to life and made friends with you.

It needs air, air supply could be the compressor. Choice of compressors are also great, there is industry, there is a quiet compressor, with which is very pleasant to work with. The compressor is desirable to take the receiver, so that was a supply of air and hence constant output pressure without much abrupt changes. Well Well, is not bad, room, airbrush compressor! Now Think about what materials we use – paints, varnishes, degreaser, solvent. Most of those involved in airbrushing paint car colors, respectively, varnishes, degreasers, solvents used car.

It is best determined by the manufacturer and with all the components to use it in order to prevent inappropriate, unpleasant situations between varnishes, paints, etc. The paint is always possible available on the selection, any color, any quantity of interest to you. Almost everything is ready, now we have to think on what to draw. We need a surface (canvas), which we'll create your masterpiece. There is already flying imagination is limitless – car, motorcycle, bicycle, telephone, computer, painting fiberboard, snowboard, helmet, cloth …. And it's not the whole list on which to draw airbrushing. But before we get down to drawing, this blade will need to prepare. This will require abrasives for polishing the surface of our future to our masterpiece. Once we draw, we will need to protect our image, so we will varnish it, and for this we need a spray (spray gun). So to summarize – to begin airbrushing, we need to be engaged: Putting airbrush compressor Paints, varnishes surface cloth Abrasives Spray Good luck with your endeavors! If you remember that, you need completed!

Comments Off on Airbrushing

Comments are closed at this time.

© 2003-2017 Bio-Computing Associates All Rights Reserved