Different Types Of Neon

For every taste, occasion and budget there is the matching neon sign to the outward rotation of the beneficence of a company Leuchtrekklame is still the best and most effective solution. But Leuchtraklame is not equal to neon. Following is an overview of the various models and types of neon. Illuminated letters represented here the logo or the letters from individual letters. Applied to a single facade neon work often more noble than lightbox. Illuminated letters are increasingly equipped with Stomsparender LED technology. There are different types of illuminated letters, here the most common types: Shell chandelier: the front of the letter consists of an opaque material. This can be for example, stainless steel, aluminium or acrylic.

Also, the bottom of the letter is lichtundurchlaassig. Only the frame, so the page”of the letter consists of a translucent material, so that the lettering is indirectly illuminated. Rear chandelier: the rear chandelier is the front and sides of the letters from an opaque material. Only the base is translucent. There is also an indirect illumination of the sign. This creates a discreet lighting that is often required in pedestrian zones (where many neon signs are attached).

Front lighting: The front of the letter is made of translucent acrylic glass and has a strong luminosity. Sides and bottom of the letter can be also partially translucent. A disadvantage of the Neon is that the power of the individual letters must be elaborately hidden and incorporated. Especially if these are subsequently attached to a building. Light boxes square, practically good light boxes. Very affordable solutions can be implemented, but also individual and exceptional achievements are possible. Also equipped with LED lights is becoming more common in light boxes. These promise a low power consumption, low maintenance and easy replacement of light sources during maintenance work. Default lightbox: the simple lightbox out Aluminium profiles with acrylic panel laminated on the printed film is. A simple solution that is the best alternative for the small budget. Because again, the printed film can make the standard box to the individual lighting object. Dekupiert: the lightbox is made of high-grade aluminum. The logo or the lettering from the front dekupiert (cut out) and deposited with a flat (colored) acrylic glass. Inserted by: from the aluminum lightbox logo, or the Schrirtzug is also dekupiert, but with a strong 10-20 mm acrylic put through. It lights the frame or the frame and the front.