By the nature of activity I have to answer many technical questions. So as not to waste my time henceforth begin to publish an article on jamz engines, their design and operation. ymz powerful, reliable and easy to use, but remember that the life of any technology depends largely on the regular and thorough care for her. Proper operation of the power unit and long life are in direct Depending on the culture of exploitation. Before use carefully read the manual that came with each engine.
It is very important to observe the rules of operation by running a new engine, as this period there is burn-in of the rubbing surfaces. It is also necessary to use fuels, lubricants and fluids designed specifically for this engine. Before starting the engine after the oil change, Oil filter element, long-term (5 days or more) parking lot, replacement or repair of assembly units and parts, install the bracket stop to position and feed off within 10-15 seconds of cranking crankshaft starter motor. If oil pressure is – you can start the engine, in the absence of – start to repeat after 1-2 minutes. After starting the engine should run at idle speed not exceeding 1000 min-1 but not more than 5 min. After start warming up the engine to operating temperature 75-90 C to produce under load, you should not warm up the engine, allowing his long work at the minimum rotation frequency of idling. Once the engine will respond to changes in fuel and brake system will ensure the normal working pressure, gradually increase speed to medium and start working traffic at lower gears.