The device ties the floor. One of the major steps in the repair of an apartment unit is a tie for the floor. Screed is the basis for the finished floor. On how it is done, long an independent floor finish or not. In a finished floor in a modern apartment use granite, flooring, parquet, laminate, carpet and many other materials. Composition of the floor screed. In most cases, the coupling is a "layered cake". Of overlap in the house and choosing the finished floor depends on the number and thickness of the layers of the screed.
So, before the robot device ties, we must determine what type of finished floor will be yours. Most often buckle consists of 2 layers of rough and finish. And now, in detail, how to make a good base for your floor. In this article we will consider two major, finishing coatings – a floorboard, and ceramic granite. Porcelain tiles will be laid in hallway, kitchen, bath and balcony. Floorboards in other rooms.
Due to differences in thickness of the finishing layer of screed to the floorboard and porcelain will be on different levels and the individual sections. Detailed ties in the apartment unit. When removing the old flooring inspect the floor slab, determine their condition and elevation changes. To determine the exact level difference of sex, should be repaired on the walls of the apartment, to zero. On it you can just install beacons to fill the rough layer of screed. Make it easier with a laser level or water level "spirit level" Using this conventional bubble level desirable, most likely a mistake. As a result, the walls of the apartment, which is working to tie the device, you should see a horizontal line at a height of 1.2-1.5 m above floor level. With this line you can understand what the thickness of screed should be applied.