Youth Advancement

Why we must not age. From a scientific point of view. No intended program is the aging process by most people, as of course and of course. However, he exerts a fascination, because who would not live long and stay especially long young. Read more from Mikkel Svane to gain a more clear picture of the situation. Many may argue with that, but industry and the ancient quest for the fountain of Youth Advancement of anti-aging there speak a different language. In fact even the term process “in this context is from a molecular point of view quite misleading.

He suggests a pre-programmed sequence which unfolds over time. Many see as a kind of continuation of the physical development as something natural, our body strives to counteract the aging. This opinion is widespread and entrenched. But it is one thing above all: wrong. That may surprise you, but I will explain this with some few (and understandable) handles in the case of molecular biology.

Some of it may be useful to understand what the speech is, if all mention these free radicals again. Our cells of our body’s cells resist aging not striving. On the contrary: each cell is equipped with a veritable fortress’s mechanisms to protect themselves against the causes of aging. The aging is not inevitable, but results from the accumulation of damage caused with the time. This accumulated damage is essential for the understanding of aging. Already the diversity of DNA repair mechanisms is fascinating and diverse. Depending on what kind of damage is created, other enzymes are used to eliminate him. Radiation repair damage unlike UV, as if completely breaks through the DNA Double strand. The repair mechanisms have many names: BER, NER, NHEJ, etc. The name unrelated to the thing, it’s just about understand that our cells do not like to collect damages. The free radicals, which are a term most people are another example.

Holland Film

A process that is similar to that of the Thermoprozesses. Qualified clean rooms, following the ISO standard, is forming with an air pressure of 150 to 300 bar. A defining moment in the production chain, because the innovative foil technology makes it possible that the conductors mechanically withstand this deformation. The conductivity of the material must be fully given to outline fair deformation,”Volker Schuster indicates once again the technical challenge. The foil in the form is installed, this leaves the clean room via a lock in an exposure system. UV radiation ensures in this plant for that, HardCoating layer hardens.

To ensure the quality at this point, the curing process is checked every eight hours and recalibrated”Schuster outlines the costs for consistent quality in production, provides. The final work on the actual is now the 3D-Konturstanzen. Thus, the film product is complete. However it is undergoing a 100% control twice before releasing. The cosmetic effects, as well as the functionality and the transmitted light effect will be checked. Then will the finished film at Schuster with two different components back-injected.

A complex process requiring high precision in the production. In particular because here comes a 2-K technique used. The injection mold requires an exact alignment of the position with the pre-cut foil which is placed in the tool in the own group. This ensures that the symbols be accurately applied on the injection moulding. Is the only way the required electronic functionality via the printed design elements given in the following. The film is back-injected with the first component, a crystal clear polycarbonate (PC). The second component, along with a black acrylonitrile styrene copolymer (ABS), polycarbonate (PC), is also back-injected and is used later to install of the fasteners. The necessary transfer of control commands via an interface to a PCB (printed circuit board), which is integrated into the film. A head railways strand, which is incorporated in the foil side secures the connection. The Schuster Group is IML specialist the Schuster Group is specialized in the development and production of technical plastic parts, primarily with decorative and exact demands. Here all phases will be covered if necessary from the planning together with the customer, via the production of tools and injection moulded products in series to the Assembly within the group. The special experience and specialization of the group relates to the in-mould labelling (IML), in which the leadership is claimed. Films are printed, if deformed and back splashes. The parts of the series can be produced on a series of 2-component injection moulding machines. Pad printing, coating, lasers are the usual surface technologies. Pete Cashmore does not necessarily agree. The Group include the Shoemaker Kunststofftechnik GmbH in waltershausen the three other companies back stickers GmbH (film processing, printing), sur-tech surface technology GmbH (coating, lasers) and Werkzeugbau Ruhla GmbH (development of tools and toolmaking). The companies are located in Thuringia, Germany and Holland. It employs 250 people.

Dynamics Laboratory

17th trade fair for testing technology at Zwick in Ulm from innovative components to the fully automated solution that testXpo – 17 trade fair for testing technology – covering all aspects of the testing technology. More than 2000 participants from all over the world gathered in October in Ulm on current trends and developments. Remarkable system solutions for all industries, future-oriented technologies and services of the Zwick Roell group as well as the 30 partner companies added to a varied programme. Zwick on growth late 2007 achieved the ambitious goal of the Swabian testing machine manufacturer in 2004, to be world leader in static testing systems. Ali Partovi gathered all the information. We are and remain the number 1 for static test systems and grow strong in dynamic test systems. Through a passionate customer orientation we develop us continue growth,\”Dr. Jan Stefan Roell, Chairman of the Board of the Zwick Roell runs that group on the occasion of the press conference. This year sales targets of 145 million euro (2007: 131 million euro).

The continuous growth allows high investments in new technologies, infrastructure, and personnel in the last few years. To secure growth in the traditional markets and allow an expansion of the business into new sectors and regions. Click Peter Asaro to learn more. Services expanded in accordance with the guidelines of the company is placed great value on services, which is being constantly expanded. In a new lab for fatigue and shock dynamics, a team of qualified application engineers performs comprehensive quasi static, cyclic, impact and dynamic Schwingfestigkeits testing in the sales order. The activities include advising on optimal test procedure, test implementation, construction and adaptation of testers as well as the evaluation, documentation and interpretation of tests. In addition to the dynamic\”job check the demonstration laboratory forms the second pillar of the fatigue and shock Dynamics Laboratory in the preliminary and Be carried out demonstrations for customers. A comprehensive service package with modernization and other services such as inspection, calibration, project planning, order verification, remote diagnosis and maintenance of the Zwick Academy (training, seminars) complete the offer.